USGlobalSat GPS Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: Low power / shutdown modes  (Read 936 times)

mr_g

  • Regular Members
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 6
Low power / shutdown modes
« on: February 21, 2012, 04:15:34 am »
Is there available low power od shutdown mode in BR355?

So It would fix its possition very fast after power up...
Logged

GS_TECH01

  • Administrator
  • Hero Member
  • *****
  • Karma: 4
  • Offline Offline
  • Posts: 1694
Re: Low power / shutdown modes
« Reply #1 on: February 24, 2012, 12:52:05 pm »
After checking with our engineers, the BR-355 does support the low power/shutdown, or formally known as Trickle Mode. Just a quick question, are you familiar or know how to enable the said mode? Please confirm.
Logged

mr_g

  • Regular Members
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 6
Re: Low power / shutdown modes
« Reply #2 on: February 27, 2012, 02:32:30 am »
No. Plesase info...  :-[
Logged

GS_TECH01

  • Administrator
  • Hero Member
  • *****
  • Karma: 4
  • Offline Offline
  • Posts: 1694
Re: Low power / shutdown modes
« Reply #3 on: February 28, 2012, 07:04:12 pm »
I will follow up with our engineers about this to see if they have some sort of instructions.
Logged

GS_TECH01

  • Administrator
  • Hero Member
  • *****
  • Karma: 4
  • Offline Offline
  • Posts: 1694
Re: Low power / shutdown modes
« Reply #4 on: February 29, 2012, 01:47:59 pm »
To enable the Trickle Mode in the device, you can possibly follow the instructions below:

1. Download the SiRFDemo program: (http://www.usglobalsat.com/store/downloads/SiRFDemo387.zip).
2. Extract the file and install the application.
3. Connect the engine module.
4. Open up the software.
5. Select the proper com port and baud rate.
6. Go to Action > Open Data Source.
7. Next, go to Action > Switch to SiRF Protocol.
8. If you see scrolling data in the Response View window, it means the board is in SiRF Mode.
9. Go to Action > Set Low Power (Trickle Power).
10. The Low Power window should come up.
11. Select TricklePower under Mode.
12. You should be able to see the other fields not grayed anymore.
13. change the other settings as you prefer.
14. Click the Send button once you're done.

Note: Be sure not to click on anything else in this software, as you can render your device unusable. Moreover, the device will return to its default settings once the internal battery drains when it is removed from power.
« Last Edit: February 29, 2012, 03:41:23 pm by USG_TECH10 »
Logged

mr_g

  • Regular Members
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 6
Re: Low power / shutdown modes
« Reply #5 on: March 08, 2012, 07:12:24 am »
I'm not connecting BR355 to PC, but embedded system with uC... So I cannot run sirfdemo on it...

What are the commands. What is the response, how it would effect GPS receiver?

And offcourse how to go back to normal working mode?
Logged

GS_TECH01

  • Administrator
  • Hero Member
  • *****
  • Karma: 4
  • Offline Offline
  • Posts: 1694
Re: Low power / shutdown modes
« Reply #6 on: March 09, 2012, 01:17:54 pm »
You can possibly read through the following documents to give you some ideas about the commands, response, etc.:

SiRF Binary Protocol: (http://gpsd.googlecode.com/files/SiRF-SiRF-v2_4.pdf)
NMEA Protocol: (http://www.usglobalsat.com/store/downloads/NMEA_commands.pdf)
Logged
Pages: [1]   Go Up
« previous next »
 

Page created in 0.233 seconds with 26 queries.