Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Dmac]

I downloaded the new Training Gym Pro GH 505 site from your website. I tried to upgrade to the latest firmware but got a "Invalid upgrade file" note. Now it won't download data giving a message about the Baud rate settings in the device. Currently using GGH 29-1001073 version 1.15.
Any help?
Thanks
Dmac

[Dmac]

I just tried to load the latest firmware again. Put the watch on "upgrading firmware", From the new Gym Pro GH 505 site I got reswult "Device detection failed. Check Com port/Baud setting" What else do I do now?

[Dmac]

I TRIED TO UPGRADE AGAIN. I DID A FACTORY RESET. SET WATCH ON SYSTEM UPGRADE THEN TRIED TO UPGRADE FIRMWARE VIA TRAINING GYM PRO GH 505. NOW I GET MESSAGE "INVALID UPGRADE FILE".
ANY HELP FROM ANYBODY?

[Longjog @ GS-Sport-Servicecenter]

Hi Dmac,

first of all have a look in the WIN device-manager if the right COM-port is selected.
Than be sure the downloaded file isnīt corrupted. If you send me a mail I can send the Firmware-file you wanted.

Best regards

Longjog

[Dmac]

Hi Longjog,
I scanned both the 1 and 3 com ports but at 50% it stopped and window comes out with message "device detection failed".
Please send firmware file to mcfoong@gmail.com. I will delete all the downloaded files to make sure I am getting the right one.
Thanks
Dmac

[Dmac]

You mentioned "WIN device-manager if the right COM-port is selected." Where do I find this? Also I keep getting message to check the device for COM Port/Baud rate settings. Can't find it on the watch.
Thanks
Dmac

[Dmac]

Hi Longjog,
Don't need to do anything. I finally fixed the problem. Thanks
Dmac