USGlobalSat GPS Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: Cadence Sensor setup  (Read 658 times)

FreightTrain

  • Regular Members
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 15
Cadence Sensor setup
« on: March 28, 2013, 10:04:40 am »

Hello,
I just purchased the 580-P and did a test ride last week.  I set up and made sure the cadence sensor magnet crossed the arrow on the transmitter, pressed the button and watched the green light flash to confirm it was reading.  I then put the bike up and did my ride a couple days later and the cadence didn't show up on my unit. My question is, does the transmitter unit have to be "turned on" before every ride? 
Logged

FreightTrain

  • Regular Members
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 15
Re: Cadence Sensor setup
« Reply #1 on: March 28, 2013, 12:31:27 pm »

Point of clarification. I was able to get the speed and cadence sensors to connect individually, but not by using the Speed/Cadence combination selection.  Is that setting only for a combined sensor?
Logged

albert

  • Hero Member
  • *****
  • Karma: 3
  • Offline Offline
  • Posts: 507
  • this product gives value for money
Re: Cadence Sensor setup
« Reply #2 on: March 28, 2013, 02:13:06 pm »

Hello FreightTrain,

the combination speed/cadence is only for the combination devices! You don't need to start the speed or cadence sensor every time!
You let it scan and if it finds the sensors the GB580P shows HR, SP, CD
 
Logged
GH-625M, Firmware: F-GGH-2A-1012103, GB580P version 2.0 F-GGB-21402241.GHX,  GH 625XT, GH 561, Training Gym Pro V1.7.10 / Sport Tracks (ST)2.1.3478/ST3.1.5202
Biker, minimum 8000 km a Year.

FreightTrain

  • Regular Members
  • *
  • Karma: 0
  • Offline Offline
  • Posts: 15
Re: Cadence Sensor setup
« Reply #3 on: March 28, 2013, 02:46:03 pm »

Thanks for clarifying.  So far very pleased with this unit as my first venture into GPS. 
Logged
Pages: [1]   Go Up
 

Page created in 0.192 seconds with 19 queries.